Experience Rally Racing with the CEN 2023 M-Sport Ford Puma Rally1 1/8 RTR Brushless
🚗 Experience Rally Racing with the CEN 2023 M-Sport Ford Puma Rally1 1/8 RTR Brushless! 🚗
Get ready to hit the tracks with the CEN 2023 M-Sport Ford Puma Rally1! This ready-to-run (RTR) brushless rally car combines power, precision, and stunning detail, making it perfect for any RC enthusiast.
Key Features:
ESC:
- 100A WP-MAX10-SCT-100A-3S RTR Sensorless (powered by HobbyWing)
- Compatible with 2-3S LiPo or 6-9 Cell NiMH batteries
- Waterproof and dustproof for all-weather performance
- Super internal switch-mode BEC with 6V / 7.4V output for high voltage servos
- Built-in capacitor module and automatic throttle range calibration
- Low voltage cut-off protection for LiPo and NiMH batteries
- Over-heat protection and throttle signal loss protection
- 5 levels of acceleration/punch and 9 levels of maximum brake force
Motor:
- CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless)
Servo:
-
12Kg Metal Gear Servo (by Savox)
- 4.8V - 0.26 sec/60° 10.0 kg-cm
- 6.0V - 0.23 sec/60° 12.0 kg-cm
- Features a 25T horn gear spline
Radio System:
-
AMP-30 TX 3-Channel Transmitter
- 2.4GHz frequency with digital trimming and adjustable steering dual-rate
- Built-in failsafe
-
AMP30 RX 3-Channel Receiver
- 2.4GHz frequency, powered by 4.8-6.0V
Body:
- Officially licensed 2023 M-Sport Ford Puma Rally 1 Edition
- Fully detailed injection-molded body accessories
- Size: 20.08 inches (510mm) length / 9.45 inches (240mm) width
Chassis:
- Sturdy 3mm aluminum chassis with front and rear shock towers
- Full precision ball bearing support and wider body mount positions
- Front skid plate with durable foam bumper and injection-molded rear diffuser
- Easy access battery tray (142mm x 48mm)
Suspension:
- Aerodynamic lower arm suspension design
- Big bore oil-filled adjustable coil-over shocks with racing springs
- Adjustable turnbuckles and wheelbase (+/- 6mm)
Drivetrain:
- Full-time 4-wheel drive with a center shaft drivetrain for maximum power transfer
- Metal transmission gears and oil-filled two differential drive system
Tires & Wheels:
- High-impact, lightweight WRC racing wheels (56 x 35.50 mm)
- High-performance racing rubber compound tires (56 x 80 x 35.50 mm)
Specifications:
- Chassis Length: 18.11 inches (460mm)
- Chassis Width: 9.06 inches (230mm)
- Wheelbase: 11.80 inches (300mm)
- Ground Clearance: 0.98 inches (25mm)
- Weight: 5.51 lb (2.5kg)
Required for Use:
- 2-3S LiPo battery
- LiPo balance charger
- LiPo safe sack
- 4 AA batteries for the transmitter
Get ready to dominate the rally scene—order your CEN 2023 M-Sport Ford Puma Rally1 today!
Product Information
Product Information
Shipping & Returns
Shipping & Returns





Experience Rally Racing with the CEN 2023 M-Sport Ford Puma Rally1 1/8 RTR Brushless
Experience Rally Racing with the CEN 2023 M-Sport Ford Puma Rally1 1/8 RTR Brushless
🚗 Experience Rally Racing with the CEN 2023 M-Sport Ford Puma Rally1 1/8 RTR Brushless! 🚗
Get ready to hit the tracks with the CEN 2023 M-Sport Ford Puma Rally1! This ready-to-run (RTR) brushless rally car combines power, precision, and stunning detail, making it perfect for any RC enthusiast.
Key Features:
ESC:
- 100A WP-MAX10-SCT-100A-3S RTR Sensorless (powered by HobbyWing)
- Compatible with 2-3S LiPo or 6-9 Cell NiMH batteries
- Waterproof and dustproof for all-weather performance
- Super internal switch-mode BEC with 6V / 7.4V output for high voltage servos
- Built-in capacitor module and automatic throttle range calibration
- Low voltage cut-off protection for LiPo and NiMH batteries
- Over-heat protection and throttle signal loss protection
- 5 levels of acceleration/punch and 9 levels of maximum brake force
Motor:
- CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless)
Servo:
-
12Kg Metal Gear Servo (by Savox)
- 4.8V - 0.26 sec/60° 10.0 kg-cm
- 6.0V - 0.23 sec/60° 12.0 kg-cm
- Features a 25T horn gear spline
Radio System:
-
AMP-30 TX 3-Channel Transmitter
- 2.4GHz frequency with digital trimming and adjustable steering dual-rate
- Built-in failsafe
-
AMP30 RX 3-Channel Receiver
- 2.4GHz frequency, powered by 4.8-6.0V
Body:
- Officially licensed 2023 M-Sport Ford Puma Rally 1 Edition
- Fully detailed injection-molded body accessories
- Size: 20.08 inches (510mm) length / 9.45 inches (240mm) width
Chassis:
- Sturdy 3mm aluminum chassis with front and rear shock towers
- Full precision ball bearing support and wider body mount positions
- Front skid plate with durable foam bumper and injection-molded rear diffuser
- Easy access battery tray (142mm x 48mm)
Suspension:
- Aerodynamic lower arm suspension design
- Big bore oil-filled adjustable coil-over shocks with racing springs
- Adjustable turnbuckles and wheelbase (+/- 6mm)
Drivetrain:
- Full-time 4-wheel drive with a center shaft drivetrain for maximum power transfer
- Metal transmission gears and oil-filled two differential drive system
Tires & Wheels:
- High-impact, lightweight WRC racing wheels (56 x 35.50 mm)
- High-performance racing rubber compound tires (56 x 80 x 35.50 mm)
Specifications:
- Chassis Length: 18.11 inches (460mm)
- Chassis Width: 9.06 inches (230mm)
- Wheelbase: 11.80 inches (300mm)
- Ground Clearance: 0.98 inches (25mm)
- Weight: 5.51 lb (2.5kg)
Required for Use:
- 2-3S LiPo battery
- LiPo balance charger
- LiPo safe sack
- 4 AA batteries for the transmitter
Get ready to dominate the rally scene—order your CEN 2023 M-Sport Ford Puma Rally1 today!
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
🚗 Experience Rally Racing with the CEN 2023 M-Sport Ford Puma Rally1 1/8 RTR Brushless! 🚗
Get ready to hit the tracks with the CEN 2023 M-Sport Ford Puma Rally1! This ready-to-run (RTR) brushless rally car combines power, precision, and stunning detail, making it perfect for any RC enthusiast.
Key Features:
ESC:
- 100A WP-MAX10-SCT-100A-3S RTR Sensorless (powered by HobbyWing)
- Compatible with 2-3S LiPo or 6-9 Cell NiMH batteries
- Waterproof and dustproof for all-weather performance
- Super internal switch-mode BEC with 6V / 7.4V output for high voltage servos
- Built-in capacitor module and automatic throttle range calibration
- Low voltage cut-off protection for LiPo and NiMH batteries
- Over-heat protection and throttle signal loss protection
- 5 levels of acceleration/punch and 9 levels of maximum brake force
Motor:
- CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless)
Servo:
-
12Kg Metal Gear Servo (by Savox)
- 4.8V - 0.26 sec/60° 10.0 kg-cm
- 6.0V - 0.23 sec/60° 12.0 kg-cm
- Features a 25T horn gear spline
Radio System:
-
AMP-30 TX 3-Channel Transmitter
- 2.4GHz frequency with digital trimming and adjustable steering dual-rate
- Built-in failsafe
-
AMP30 RX 3-Channel Receiver
- 2.4GHz frequency, powered by 4.8-6.0V
Body:
- Officially licensed 2023 M-Sport Ford Puma Rally 1 Edition
- Fully detailed injection-molded body accessories
- Size: 20.08 inches (510mm) length / 9.45 inches (240mm) width
Chassis:
- Sturdy 3mm aluminum chassis with front and rear shock towers
- Full precision ball bearing support and wider body mount positions
- Front skid plate with durable foam bumper and injection-molded rear diffuser
- Easy access battery tray (142mm x 48mm)
Suspension:
- Aerodynamic lower arm suspension design
- Big bore oil-filled adjustable coil-over shocks with racing springs
- Adjustable turnbuckles and wheelbase (+/- 6mm)
Drivetrain:
- Full-time 4-wheel drive with a center shaft drivetrain for maximum power transfer
- Metal transmission gears and oil-filled two differential drive system
Tires & Wheels:
- High-impact, lightweight WRC racing wheels (56 x 35.50 mm)
- High-performance racing rubber compound tires (56 x 80 x 35.50 mm)
Specifications:
- Chassis Length: 18.11 inches (460mm)
- Chassis Width: 9.06 inches (230mm)
- Wheelbase: 11.80 inches (300mm)
- Ground Clearance: 0.98 inches (25mm)
- Weight: 5.51 lb (2.5kg)
Required for Use:
- 2-3S LiPo battery
- LiPo balance charger
- LiPo safe sack
- 4 AA batteries for the transmitter
















